Page 452 - Manual_Polaris_RZR_ProXP-20-21

STEERING / SUSPENSION

8. Install LSC and retaining ring. 23.Install bearing assembly with cinch ring.

9. With the retaining ring fully installed, position LSC 24.Install negative spring assembly.
with IFP tool.
10.Install retaining ring.
11. Press spherical bearing into position.
12.Install retaining ring.
13.Apply Loctite 638 to shaft, 2 threads up, 2 threads
wide 360°.
14.Torque eyelet to specification with shaft secured in
clamp blocks.

TORQUE
Shock Eyelet:
50 ft-lb (68 Nm)

15.Install 398-00-095-B Bullet tool on shaft to install 25.Install compression valve stack.
bumper.
16.Install body cap.
17.Install T-seal.

18.Install 1st T-seal back-up ring.
19.Install 2nd T-seal back-up ring
20.Install wiper seal.
21.Lubricate all seals with Slick Honey.
22.Install external o-ring.

9.48 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.