Page 447 - Manual_Polaris_RZR_ProXP-20-21

STEERING / SUSPENSION

23.Use a wire brush, heat and a pick to remove any 27.Remove rebound valve stack from the assembly and
Loctite residue left on body threads. Clean thoroughly cable tie together. Clean with contact cleaner.
with contact cleaner and lint-free towel inside and out.

NOTICE
24.Remove both internal o-rings.
Damping pistons are directional. Rebound side shown.

28.Remove damping piston.

25.Use a wire brush, heat and a pick to remove any
Loctite residue left on body cap threads. Clean
thoroughly with contact cleaner and lint-free towel 9
inside and out.
29.Note the bleed shim orientation on compression valve
26.Remove lock nut from the shaft assembly. stack.
30.Remove compression valve stack and cable tie
together. Clean with contact cleaner.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 9.43
© Copyright Polaris Industries Inc.