Page 448 - Manual_Polaris_RZR_ProXP-20-21

STEERING / SUSPENSION

31.Remove negative spring assembly, bearing 34.Apply Loctite primer 7649 to eyelet threads q. Wipe
assembly, and bumper. over-spray off any external surface.

35.Remove all seals and o-rings from bearing assembly.

32.With the shaft assembly placed in clamp block and
secured in vise, apply a sufficient amount of heat to
the eyelet with a propane torch to remove the eyelet NOTICE
with the correct body cap socket. If the DU bearing needs replacement, replace the
33.Use a wire brush, heat, and a pick to remove any complete bearing assembly.
Loctite residue left in the eyelet and shaft threads.
Clean thoroughly with contact cleaner and lint-free 36.Clean all surfaces of the bearing housing and cinch
towel.
ring.

9.44 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.