Page 135 - Manual Oficina XP 1000 14-16

ENGINE / COOLING SYSTEM

CYLINDER / PISTON REMOVAL 5. Remove the piston / connecting rod assemblies from
the cylinder.
CAUTION
Pistons must be removed from the cylinders with the
connecting rods attached.
DO NOTattempt to service the cylinder or pistons
without disassembling the crankcase. Although you can
remove the cylinder and pistons without disassembly,
you will not be able to reassemble the engine because
of the unique cylinder skirt and crankcase design.
3
1. PerformENGINE DISASSEMBLY / INSPECTION -
TOP END, page 3.35 and ENGINE DISASSEMBLY
/ INSPECTION - BOTTOM END, page 3.46 and the
procedures.

2. Rotate the engine so the cylinder is facing up.
3. Remove the Cylinder Holding & Camshaft Timing NOTE
Plate (PU-50563) q from the cylinder. If the pistons are to be reused, mark the pistons so they
are reassembled in the same cylinder bore and
direction from which they were removed (MAG / PTO).

4. Carefully lift the cylinder and pistons from the upper
crankcase.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 3.57
© Copyright Polaris Industries Inc.