Page 130 - Manual Oficina XP 1000 14-16
P. 130
ENGINE / COOLING SYSTEM
16. Remove the eight M10 k, two M8 l and one M6 j BALANCE SHAFT REMOVAL / INSPECTION
lower crankcase bolts. Discard the eight M10 bolts. 1. Perform Crankcase Disassembly / Inspection, page
3.50 procedure.
2. Note timing marks on balance shaft and crankshaft
drive gears. Shafts must be properly timed upon
assembly.
17. Tap on the lower crankcase in reinforced areas with
a soft faced hammer to loosen. Carefully lift up and
remove the lower crankcase half.
3. Carefully rotate the balance shaft w and remove it
from the crankcase.
4. Inspect the balance shaft gear teeth for damage.
3.52 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
