Page 188 - Manual Oficina XP 1000 14-16

FUEL SYSTEM

FUEL TANK INSTALLATION 12. Reinstall the battery and battery bracket. Torque
1. Carefully reinstall the fuel tank assembly. Install the fastener to specification.
inner tank bracket with the fuel tank to ensure the TORQUE
bracket is inserted properly into the lower fuel tank
mount. Battery Bracket:
8 ft-lbs (11 Nm)
2. Reinstall the fuel tank bracket and fasteners.
3. Install the vent line. 13. Install both seats and test the fuel pump by turning
the ignition key on and listening for the pump to
4. Reinstall block-off panel. Secure with plastic rivets
and torque screws to specification. activate. Check the fuel line fittings for leaks.

TORQUE
Block-off Panel Screws
8 ft-lbs (11 Nm)

5. Reinstall the seat base frame and torque fasteners to
specification.
TORQUE
Seat Base Frame fasteners
8 ft-lbs (11 Nm)

6. Install regulator and fuse box to the block-off panel.
Torque fasteners to specification.

TORQUE
Regulator/Fuse Box fasteners
5 ft-lb (7 Nm)

7. Install fuel tank strap screw. Torque screw to
specification.
TORQUE
Fuel Tank Strap Screw
8 ft-lbs (11 Nm)

8. Reinstall center console, shift knob and screws.
9. Reinstall seat belt mechanism. Torque bolt to
specification.

TORQUE
Seat Belt Mechanism Bolt:
40 ft-lbs (54 Nm)

10. Reinstall right rocker panel and all previously
removed fasteners.
11. Reconnect the fuel line and fuel pump electrical
harness. Verify connections are secure.

4.20 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.