Page 246 - Manual Oficina XP 1000 14-16

PVT SYSTEM

SHIFT WEIGHT INSPECTION BUTTON TO TOWER CLEARANCE
1. Remove shift weight bolts and weights. Inspect the INSPECTION
contact surface of each weight. The surface should 1. Inspect the button to tower clearance as shown.
be smooth and free of dents or gall marks. Inspect Replace the drive clutch if clearance is beyond
the weight pivot bore and bolts for wear or galling. If specification.
weights or bolts are worn or broken, replace in sets
of three with new bolts and nuts.

Button to Tower Clearance:
.000-.012″ (.000-.304 mm)
WARNING
The clutch assembly is a precisely balanced unit. Never 2. Inspect the tower sheave surfaces. Replace the drive
replace parts with used parts from another clutch clutch if worn, damaged or cracked.
assembly!

NOTE
A damaged shift weight is usually caused by a
damaged or stuck roller in the spider assembly. See
“Drive Clutch Roller Pin and Button Service”.

5.22 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.