Page 395 - Manual Oficina XP 1000 14-16

STEERING / SUSPENSION

5. Slide body cap removal tool over body and place the 9. Remove the shaft assembly and body assembly.
retaining ring from the reservoir end cap around the
body cap. Slide the tool up to the retaining ring and
tap with hammer to remove.

10.Use the IFP tool to hold the IFP.

IFP Tool:
6. Once the cap is removed it will expose the bearing commercially available
assembly. On 2.5 diameter shocks, you will need to also available from FOX 398-00-394
apply a sufficient amount of heat to the bearing
assembly to break the Loctite bond between the cinch 11. Remove bleed screw and o-ring with extra long 1/8"
ring and the bearing assembly. hex wrench.
NOTE
The seal will be destroyed from the heat and must be
replaced.

7. Hold cinch ring with spanner and rotate bearing
assembly counter-clockwise to release pressure on
retaining ring.
8. Press down on bearing assembly and remove 8
retaining ring.

12.Remove IFP.
13.Dump out used shock oil.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 8.47
© Copyright Polaris Industries Inc.