Page 398 - Manual Oficina XP 1000 14-16

STEERING / SUSPENSION

31.Remove negative spring assembly, bearing 34.Apply Loctite primer 7649 to eyelet threads q. Wipe
assembly, and bumper. over-spray off any external surface.

35.Remove all seals and o-rings from bearing assembly.

32.With the shaft assembly placed in clamp block and
secured in vise, apply a sufficient amount of heat to
the eyelet with a propane torch to remove the eyelet NOTE
with the correct body cap socket. If the DU bearing needs replacement, replace the
33.Use a wire brush, heat, and a pick to remove any complete bearing assembly.
Loctite residue left in the eyelet and shaft threads.
Clean thoroughly with contact cleaner and lint-free
towel. 36.Clean all surfaces of the bearing housing and cinch
ring.

8.50 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.