Page 402 - Manual Oficina XP 1000 14-16

STEERING / SUSPENSION

8. Install LSC and retaining ring. 23.Install bearing assembly with cinch ring.

9. With the retaining ring fully installed, position LSC 24.Install negative spring assembly.
with IFP tool.
10.Install retaining ring.
11. Press spherical bearing into position.
12.Install retaining ring.
13.Apply Loctite 638 to shaft, 2 threads up, 2 threads
wide 360°.
14.Torque eyelet to specification with shaft secured in
clamp blocks.
TORQUE
Shock Eyelet:
50 ft-lb (68 Nm)

15.Install 398-00-095-B Bullet tool on shaft to install
bumper. 25.Install compression valve stack.
16.Install body cap.
17.Install T-seal.
18.Install 1st T-seal back-up ring.
19.Install 2nd T-seal back-up ring
20.Install wiper seal.
21.Lubricate all seals with Slick Honey.
22.Install external o-ring.

8.54 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.