Page 42 - Manual Oficina XP 1000 14-16
P. 42
MAINTENANCE
GREASE LUBRICATION POINTS
There are grease fittings at each front A-arm pivot point, each rear torsion bar bushing and on the front propshaft
yokes. Apply grease until all traces of water have been purged out at each of these areas.
ITEM METHOD RECOMMENDED LUBE FREQUENCY
Front A-arm Grease 3 fittings on each side
Pivot Bushings of the vehicle q Polaris All Season Grease
Front Stabilizer Grease fittings every 500
Bar Bushings Grease the fitting on each side Polaris All Season Grease miles (800 km); Grease
of the vehicle w
(FOX and INT’L) before long periods of
storage, and after
Grease 2 fittings through the
Rear Stabilizer Bar thoroughly washing or
Bushings skid plate access holes on Polaris All Season Grease submerging the vehicle
each side of the vehicle e
Grease middle and rear
Propshaft Yokes Polaris Premium U-Joint Grease
fittings r
*There is no grease point on the upper control arm rear mount.
2.8 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
