Page 420 - Manual Oficina XP 1000 14-16

BRAKE SYSTEM

Caliper Removal NOTE
NOTE Refer to the “Electronic Parts Catalog” for parking brake
caliper replacement parts information.
Do not get oil, grease, or fluid on the parking brake
pads. Damage to or contamination of the pads may
cause the pads to function improperly. 1. Remove the two caliper assembly bolts (C).

1. Remove the clip pin and pin (A) from the parking
brake cable.

2. Slide the brake pads and springs from the assembly.
NOTE

NOTE Retain the lever and ball bearings for reassembly.
Be sure the parking brake is not engaged.
3. Inspect brake pads for excessive wear. Replace as
needed.
2. Remove the two fasteners (B) retaining the parking 4. Check the three steel balls for any signs of cracking.
brake caliper mount / shift cable bracket.
Replace as needed.
5. Check ball seats in lever and stationary actuator. If
excessively worn, replace parts as needed.

3. Lift the parking brake caliper off the brake disc and
remove it from the vehicle.
Caliper Disassembly / Inspection

9.14 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.