Page 423 - Manual Oficina XP 1000 14-16

BRAKE SYSTEM

FRONT BRAKE PADS

PAD REMOVAL 5. Push caliper piston into caliper bore slowly using a
C-clamp or locking pliers with pads installed.
1. Elevate and support front of vehicle.
CAUTION
Use care when supporting vehicle so that it does not tip
or fall. Severe injury may occur if machine tips or falls.

2. Remove the wheel nuts and front wheel.
3. Loosen the pad adjuster screw 2-3 turns.

NOTE
Brake fluid will be forced through compensating port
into master cylinder fluid reservoir when piston is
pushed back into caliper. Remove excess fluid from
reservoir as required.

6. Push the mounting bracket inward and slip the outer
4. Remove the upper and lower caliper mounting bolts brake pad out between the bracket and caliper body.
and remove the caliper from the front hub.

NOTE
When removing caliper, use care not to damage brake
line. Support caliper to avoid kinking or bending brake
line.

9

7. Remove the inner pad from the bracket and caliper.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 9.17
© Copyright Polaris Industries Inc.