Page 440 - Manual Oficina XP 1000 14-16

BRAKE SYSTEM

3. Install lower radius rod bolt, washer and new nut.
Torque to specification.

TORQUE
Radius Rod to Bearing Carrier Bolt:
40 ft-lb (54 Nm)

4. Install the pad adjustment screw and turn until
stationary pad contacts disc, then back off 1/2 turn.
5. Follow bleeding procedure outlined earlier in this
chapter.
6. Install wheel and torque wheel nuts to specification.

TORQUE
Wheel Nuts:
120 ft-lbs (163 Nm)

NOTE
If new pads are installed, refer to Brake Burnishing
Procedure, page 9.29.

9.34 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.