Page 485 - Manual Oficina XP 1000 14-16

ELECTRICAL

IGNITION (KEY) SWITCH AWD / 2WD SWITCH (MODELS WITHOUT
1. Disconnect the key switch harness by depressing the TURF)
connector lock and pulling on the connector. Do not 1. Disconnect the AWD / 2WD switch harness by
pull on the wiring. depressing the connector locks and pulling on the
2. Test between the 3 sets of outputs (OFF / ON / connector. Do not pull on the wiring.
START). If any of the tests fail, replace ignition 2. Test between the 2 sets of outputs (AWD / 2WD). If
switch assembly. any of the tests fail, replace the switch assembly.
• Turn the ignition key to ON. There should be continuity • Move the switch to AWD (ON). There should be
between switch pins C and D. continuity between switch pins 2 and 3 as well as 3
• Turn the ignition key to START. There should be and 7.
continuity between switch pins A and B; C and D. • Move the switch to 2WD (NONE / OFF). There should
ONLY be continuity between pins 3 and 7.

11

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 11.13
© Copyright Polaris Industries Inc.