Page 52 - Manual Oficina XP 1000 14-16

MAINTENANCE

RADIATOR INSPECTION / CLEANING COOLANT DRAIN / FILL
1. Check radiator air passages for restrictions or 1. Remove the front hood.
damage.
WARNING
Never drain the coolant when the engine and radiator
are warm or hot. Hot coolant can cause severe burns.
Allow engine and radiator to cool.

2. Slowly remove the pressure cap to relieve any
cooling system pressure.
3. Place a suitable drain pan underneath the radiator
fitting on the front right side of the vehicle.
4. Drain the coolant from the radiator by removing the
lower coolant hose from the radiator as shown q.

q Radiator
w Shroud
e Fan

2. Carefully straighten any bent radiator fins.
3. Remove any obstructions with low pressure
compressed air or low pressure water.

CAUTION
Washing the vehicle with a high-pressure washer could 5. Allow coolant to drain completely. Properly dispose
damage the radiator fins and impair the radiators of the used coolant.
effectiveness. Use of a high-pressure washer is not
recommended. 6. Reinstall coolant hose and reposition the spring
clamp.
7. Remove the pressure cap. Using a funnel, add the
recommended coolant to the top of the filler neck and
fill the recovery bottle to the MAX level.
8. Refer to Cooling System Bleeding Procedure, page
3.20.
Recommended Coolant:
Polaris 50/50 Extended Life Anti-freeze
2880514 (quart)
2880513 (gallon)

2.18 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.