Page 82 - Manual Oficina XP 1000 14-16
P. 82
ENGINE / COOLING SYSTEM
OIL PRESSURE TEST 5. Start engine and allow it to reach operating
1. Attach the Oil Pressure Gauge Adapter (PU-50565) temperature, monitoring gauge indication.
to the Oil Pressure Gauge (PV-43531).
NOTE
Test results are based on the use of the recommended
engine oil (Polaris PS-4 or PS-4 Extreme Duty) at
operating temperature, and may vary considerably if
any other oil is used or if engine is not up to
temperature.
Oil Pressure Specification (Engine Hot):
Minimum @ 1200 RPM: 10 PSI
Minimum @ 7000 RPM: 40 PSI
6. Upon assembly, torque the crankcase gallery plug to
specification.
TORQUE
Crankcase Oil Gallery Plug:
11 ft-lbs (15 Nm)
Oil Pressure Gauge Adapter: PU-50565
Oil Pressure Gauge: PV-43531
2. Remove the seats, engine service panel, and divider
panel heat shield.
3. Clean the area around the main oil gallery plug ,
located in the upper crankcase on the MAG side of
the engine.
4. Remove the crankcase gallery plug q and insert the
oil pressure adapter.
3.4 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
