Page 93 - Manual Oficina XP 1000 14-16

ENGINE / COOLING SYSTEM

ENGINE COOLING SYSTEM

ENGINE COOLING SYSTEM 2. Remove pressure cap and pressure test the cooling
SPECIFICATIONS system using a commercially available pressure
tester.
Cooling System Specifications

CONDITION COOLANT TEMP °F (°C)
Room Temperature 68° F (20° C)
Thermostat Open 180° F (82° C)
3
Fan Off 192° F (89° C)
Fan On 198° F (92° C)

Thermostat Full Open 203° F (95° C)
Engine Temperature 233° F (112° C)
Overheat Indicator

Engine Protection 236° F (113° C)
Ignition Misfire
Engine Protection 257° F (125° C)
Shutdown

ITEM SPECIFICATION

Cooling System XP 5.36 qt (5.0 L)
Capacity
XP4 6.08 qt (5.75 L)
Pressure Cap Relief 13 PSI 3. The system must maintain 10 psi for five minutes or
longer. If pressure loss is evident within five minutes,
check the filler neck, radiator, hoses, clamps and
Polaris 50/50 Extended Life Anti-freeze water pump weep hole for leakage.
2880514 (quart)
2880513 (gallon)

Recommended Coolant
Use only high quality antifreeze/coolant mixed with
distilled water in a 50/50 or 60/40 ratio, depending on
freeze protection required in your area.
CAUTION: Using tap water in the cooling system will
lead to a buildup of deposits which may restrict coolant
flow and reduce heat dissipation, resulting in possible
engine damage. Polaris Premium 60/40 Antifreeze/
Coolant is recommended for use in all cooling systems
and comes pre-mixed, ready to use.

COOLING SYSTEM PRESSURE TEST
1. Remove the hood from the front cab.

WARNING
Never remove pressure cap when engine is warm or
hot. The cooling system is under pressure and serious
burns may result. Allow the engine to cool before
servicing.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 3.15
© Copyright Polaris Industries Inc.