Page 94 - Manual Oficina XP 1000 14-16
P. 94
ENGINE / COOLING SYSTEM
COOLING SYSTEM PRESSURE CAP TEST RADIATOR REMOVAL / INSTALLATION
1. Remove the hood from the front cab. 1. Remove the hood and front bumper (See Chapter 10
– Hood and Front Body Work, page 10.20and Front
WARNING Bumper, page 10.19).
Never remove pressure cap when engine is warm or 2. Remove the four fasteners that secure the front
hot. The cooling system is under pressure and serious bumper support to the main frame.
burns may result. Allow the engine to cool before
servicing.
2. Remove pressure cap q and test using a pressure
cap tester (commercially available).
3. Drain radiator by removing lower radiator hose q.
Be sure to catch and dispose of coolant properly.
3. The pressure cap relief pressure is 13 psi. Replace
cap if it does not meet this specification.
WARNING
The cooling system is under pressure and serious
burns may result.
Allow the engine to cool before servicing.
4. Disconnect cooling fan electrical connector.
5. Remove the upper radiator hose from the radiator.
3.16 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
