Page 216 - Manual Oficina Polaris RZR XP 1000 17-18

FUEL SYSTEM

4. Route the fuel vent line up along the frame and VENT LINE TERMINATION FITTING
secure vent line to the frame with three hinge clips e. This fitting should be inspected and tested using a Mity
Vac™ to ensure proper venting. Connect the Mity Vac to
the fitting and give it 5 pumps. The gauge should return
to 0 immediately or there is an obstruction.

5. Route the fuel vent line between the airbox and shock
mount.

6. Route the fuel vent line along the bottom of the
support tube. NOTICE
7. Route the fuel vent line up along the outside of the If the vent line fitting is removed from the frame, it must
support tube and into the rear ROPS tube r. be replaced. The ears on the clip (arrows) will not hold
properly once it is removed.

FUEL LINE QUICK CONNECT REMOVAL
When properly used, fuel line quick connects can be
disconnected and reconnected multiple times for vehicle
service needs. If the quick connect is damaged, it is not
designed to be serviceable and the fuel line assembly
will require replacement.
There are two methods of disconnecting Fuel line quick
connects, the preferred method is by using a small
straight blade screwdriver.
Screwdriver Method:

4.22 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.