Page 76 - Manual Oficina Polaris RZR XP 1000 17-18

MAINTENANCE

ENGINE

ENGINE OIL LEVEL 6. Add the recommended oil as necessary to bring the
oil level within the SAFE range on dipstick. Do not
This engine has a wet-sump design, meaning the engine
oil is contained in the bottom of the crankcase. To check overfill (see NOTE below).
the oil level, follow the procedure listed below:
Access the oil dipstick through the opening in front of the
passenger rear tire.
Access the oil fill cap through the cargo box access
panel.
Polaris recommends the use of PS-4 Synthetic or PS-4
Extreme Duty Synthetic 4-Cycle Engine Oil.

FLUID CAPACITY
Recommended Engine Oil:
Capacity: 2.5 qt (2.4 L)
PS-4 Full Synthetic 5W-50 NOTE
Ambient Temp Range: -35° F to 100° F A rising oil level between checks during cold weather
operation can indicate contaminants such as gas or
PS-4 Extreme Duty moisture collecting in the crankcase. If the oil level is
Ambient Temp Range: 0° F to 120° F over the upper mark, change the oil immediately.
1. Position vehicle on a level surface and place the 7. Add engine oil through the oil fill cap w located on
transmission in PARK. top of the valve cover, under the cargo box access
panel.
2. Stop the engine and allow it to cool down before
removing the dipstick.

3. Unlock the dipstick lever q. Remove the dipstick and
wipe it dry with a clean cloth.

8. When finished, reinstall dipstick and lock the lever.

4. Reinstall the dipstick and push it into place. Do not
lock the dipstick
NOTE
Make certain the dipstick is inserted all the way into the
dipstick tube to keep the depth of the dipstick
consistent.

5. Remove the dipstick and check the oil level.

2.30 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.