Page 95 - Manual Oficina Polaris RZR XP 1000 17-18

MAINTENANCE

TRANSMISSION AND FRONT GEARCASE

SPECIFICATION CHART

GEARCASE LUBRICANT CAPACITY FILL / DRAIN PLUG TORQUE
without turf mode: 2
44 oz
(1300 mL)
Transmission AGL with turf mode 14 ft-lbs (19 Nm)
(INT’L):
40.5 oz
(1200 mL)
8.5 oz
Front Gearcase Demand Drive Fluid 10 ft-lbs (14 Nm)
(250 mL)

TRANSMISSION LUBRICATION 3. If lubricant level is not even with bottom threads w,
add recommended lubricant as needed. Do not
NOTE overfill.

It is important to follow the transmission maintenance 4. Reinstall the fill plug and torque to specification.
intervals described in the Periodic Maintenance Chart.
Regular lubricant level inspections should be performed TORQUE
as well.
Transmission Fill / Drain Plug Torque:
14 ft-lbs (19 Nm)
The transmission lubricant level should be checked and
changed in accordance with the maintenance schedule.
Transmission Lubricant Change
• Be sure vehicle is positioned on a level surface when
checking or changing the lubricant. The drain plug is located on the bottom of the
transmission gearcase. Access the drain plug
• Check vent hose to be sure it is routed properly and through the drain hole in the skid plate.
unobstructed.
5. Remove the fill plug (see Chapter 2 – Transmission
Lubricationpage 2.49).
Transmission Lubricant Level Check
6. Place a drain pan under the transmission drain plug.
The fill plug is located on the rear portion of the
transmission gearcase. Access the fill plug at the rear of 7. Remove drain plug e and allow lubricant to drain
the vehicle. Maintain lubricant level even with the bottom completely.
of the fill plug hole.
1. Position vehicle on a level surface.
2. Remove the fill plug q and check the lubricant level.

8. Clean the drain plug magnetic surface.
9. Reinstall the drain plug and torque to specification.

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 2.49
© Copyright Polaris Industries Inc.