Page 96 - Manual Oficina Polaris RZR XP 1000 17-18

MAINTENANCE

10. Add the recommended amount of lubricant through FRONT GEARCASE LUBRICATION
the fill plug hole. Maintain the lubricant level at the
bottom of the fill plug hole when filling the NOTE
transmission. Do not overfill.
It is important to follow the front gearcase maintenance
FLUID CAPACITY intervals described in the Periodic Maintenance Chart.
Regular fluid level inspections should be performed as
Recommended Transmission Lubricant: well.
AGL
Capacity: 44 oz (1300 mL) The front gearcase fluid level should be checked and
Capacity (INT’L): changed in accordance with the maintenance schedule.
40.5 oz (1200 mL)
• Be sure vehicle is positioned on a level surface when
11. Reinstall the fill plug and torque to specification. checking or changing the fluid.
• Check vent hose to be sure it is routed properly and
TORQUE unobstructed.
Transmission Fill / Drain Plug Torque:
14 ft-lbs (19 Nm) Front Gearcase Fluid Level Check
The fill plug is located on the bottom right side of the front
12. Check for leaks. Dispose of used lubricant properly. gearcase. Access the fill plug through the right front
wheel well. Maintain fluid level even with the bottom of
the fill plug hole.
1. Position vehicle on a level surface.
2. Remove the fill plug q and check the fluid level.

3. If fluid level is not even with the bottom threads, add
the recommended fluid as needed. Do not overfill.
4. Reinstall the fill plug and torque to specification.
TORQUE
Front Gearcase Fill / Drain Plug Torque:
10 ft-lbs (14 Nm)

Front Gearcase Fluid Change:
The drain plug is located on the bottom of the front
gearcase. Access the drain plug through the access
hole in the frame underneath the front gearcase.
5. Remove the fill plug (see Chapter 2 – Front
Gearcase Lubricationpage 2.50).
6. Place a drain pan under the front gearcase drain
plug.

2.50 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.