Page 150 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

WATER PUMP SERVICE
Removal
1. Remove four screws q and Water Pump Cover w.

NOTE
Mechanical seal shown disassembled using special
2. Remove Water Pump Impeller e. tool. New seal is one-piece.

4. An oil seal y is located behind the mechanical seal
bore. This seal should be replaced when replacing
the mechanical seal.

NOTE
Water pump impeller has left hand threads.

5. Use a small pick to puncture the seal and pull it out of
3. Remove Water Pump Seal r using special tool the bore.
2872105–A. The water pump seal shell t will remain
in the engine and will need to be removed. Carefully 6. Install a new oil seal with the seal lips towards the
pry around the outer edge of the seal body with a pick balance shaft.
or small flat-blade screw driver.. Do not damage the 7. Press seal into bore until it is flush with the case
mating surface. Continue prying around the outer surface u.
circumference until the seal body is removed from the
bore.

3.28 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.