Page 178 - Manual Oficina Polaris Sportsman 570 2014 a 2016
P. 178
ENGINE / COOLING SYSTEM
3. Measure connecting rod small end ID. Inspect PISTON RING INSTALLED GAP
bearing surface for damage.
1. Place each piston ring inside cylinder. Use a piston
to push the ring squarely into place TBD” (mm) down
from the cylinder head gasket surface.
2. Measure installed gap with a feeler gauge at location
(A).
Piston Pin Degree of Fit:
Pin should be a push-fit by hand with piston at
room temperature or warmed slightly. specification
Connecting Rod Small End ID:
Std.: 0.7086 - 0.7093″ (18.000 - 18.018 mm) NOTE
Always check piston ring installed gap after re-boring a
cylinder or when installing new rings.
3.56 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.
