Page 182 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

5. Carefully install the piston into the bottom of the 8. Install a new base gasket.
cylinder.

NOTE
NOTE
Base gasket and surfaces must be dry and oil free.
Ring band and compression pliers tools not shown in Match gasket and deck profiles during assembly. If
image. gasket is installed incorrectly, it will hang over the edge
of the crankcase.
6. Install the piston deep enough into the cylinder so
that all of the piston rings are captured inside the 9. Verify the connecting rod is at TDC.
cylinder. Note there is a relief cut q into the PTO side 10.Install the cylinder / piston assembly onto the engine.
of the cylinder to access the piston pin and circlip. Stop when the connecting rod piston pin bore is
aligned with the piston pin bore.

7. Remove the piston ring band tool from the piston.

3.60 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.