Page 196 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

STARTER ONE-WAY CLUTCH INSPECTION 8. Remove clutch e and inspect both sides of drive
rollers r and roller contact surface t inside hub for
1. Remove flywheel as outlined in this chapter.
wear, damage, or uneven surface.
2. Place flywheel on work bench. Grasp gear and rotate
clockwise. It should turn smoothly without binding.
3. Rotate gear counterclockwise. The gear should
immediately lock in position and not slip.
4. Remove starter gear from the flywheel assembly.
5. Inspect surface of flywheel gear hub q for wear,
galling, or uneven surface.

9. Inspect drive surface of starter gear and bearing
surface for wear, damage, or uneven surface. If any
starter clutch component is worn or damaged,
replace clutch, clutch hub, and starter gear.

6. Inspect crankshaft bearing surface for abnormal
wear.
7. Remove the w one-way clutch retaining bolts.

3.74 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.