Page 209 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

STATOR / STATOR COVER INSTALLATION
1. Clean and degrease stator screws and threads in the
stator housing.
2. Clean mounting surfaces of stator q and housing w.
3. Apply crankcase sealant to edges of rubber stator
grommet.
4. Set the stator in housing and press wire grommet
into slot on housing.
5. Apply Loctite® 242™ to end (8-10 threads) of the 3
stator screws e and the wire routing bracket screws
r.
6. Install a new stator cover gasket.
7. Install the stator cover.

CAUTION
The flywheel contains powerful magnets. Use caution
when installing the stator cover.
DO NOT place fingers between cover and crankcase at
any time during the installation process or injury could
result.

8. Install the stator cover screws and torque to
specification.

TORQUE
Stator Cover BoltsStator to Cover Retaining Bolts:
9 ft-lbs (12 Nm)Apply Loctite® 242™

TORQUE
Stator Wire Bracket Bolts:
6 ft-lbs (9 Nm)Apply Loctite® 242™

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 3.87
© Copyright Polaris Industries Inc.