Page 206 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

5. Install Crank-Balance Shaft Holder PA-51424 t onto STARTER ONE-WAY CLUTCH INSTALLATION
the balance shaft and crankshaft.
1. Install one-way clutch in clutch hub with flange of
clutch q facing the flywheel.

6. Install washer r , nut t and torque balance shaft
nut to specifications.

TORQUE
NOTE
Balance Shaft Nut: The one-way clutch can be installed into the hub
132 ft-lbs (180 Nm) incorrectly. This will cause engine cranking issues.

2. Clean screw threads in flywheel to remove all oil or
grease.
3. Apply Loctite® 272™ on the one way clutch retaining
bolts threads w. Place hub on flywheel and install
bolts.
4. Torque screws to specification.

TORQUE
One Way Clutch Retaining Bolts:
9 ft-lbs (12 Nm)Apply Loctite® 272™

3.84 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.