Page 296 - Manual Oficina Polaris Sportsman 570 2014 a 2016
P. 296
ENGINE / COOLING SYSTEM
STARTER ONE-WAY CLUTCH INSPECTION 7. Remove the one-way clutch retaining bolts r.
1. Remove flywheel as outlined in this chapter.
2. Place flywheel on work bench. Grasp gear and rotate
clockwise q. It should turn smoothly without binding.
8. Remove clutch and inspect both sides of drive rollers
t and roller contact surface y inside hub for wear,
damage, or uneven surface.
3. Rotate gear counterclockwise. The gear should
immediately lock in position and not slip.
4. Inspect inside of hub w for wear, galling, or uneven
surface.
5. Inspect crankshaft bearing surface e for abnormal
wear.
9. Inspect drive surface of starter gear u for wear,
damage, or uneven surface. If any starter clutch
component is worn or damaged, replace clutch,
clutch hub, and starter gear.
6. Remove starter gear from the flywheel assembly.
3.174 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.
