Page 302 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

11. Torque sprocket bolts to specification. 16. Torque the new crankcase bolts to in sequence to
specification.
TORQUE
Oil Pump Sprocket Bolt:
9 ft-lbs (12 Nm)

FLUID CAPACITY

Oil Capacity:
Approx. 2 Quarts (1.9 L)
Oil Filter Wrench:
PU-50105 or 2.5” (64 mm)
Oil Type:
Polaris PS-4
Synthetic Engine Oil
Oil Pressure
Minimum Specification:
(using Polaris PS-4 Plus at operating temperature)
10 PSI @ 1200 RPM(Minimum)
40 PSI @ 7000 RPM(Minimum)

12. Prepare Inter (mag) and mag side crank case by
clean all mating surfaces.
13. Apply a thin film of Crankcase Sealant evenly to a TORQUE
clean and oil-free MAG crankcase mating surface. Intermediate Mag Cover:
9 ft-lb (12 Nm)
Crankcase 3 Bond Sealant: 2871557
14. Install the inter (mag) crankcase bolts finger tight in
MAG side crankcase.
CRANKCASE BREATHER VALVE / HOSE
15. Tighten all bolts evenly until snug.
The breather valve is on the hose that runs between the
engine and air box. Be sure breather line is routed prop-
erly and secured in place.

NOTE
Notice the hose adapter used in the engine breather
hose assembly.

1. Remove the left side panel.

3.180 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.