Page 472 - Manual Oficina Polaris Sportsman 570 2014 a 2016

TRANSMISSION

6. With all the components in the correct position, 8. Install the rear drive differential and drive chain,
install the (4) output gear assembly retaining screws. following these precautions:
Apply Loctite 242® to the threads of the screws. • The case half rear output seal should be removed prior
Torque the screws to specification.
to installation of the differential, as seal damage can
occur with seal installed due to the angle of entry.
NOTE
• Install the differential sliding geardog onto the shift fork
If the transmission is in gear, place the transmission in arms at the same time the silent chain is installed.
Neutral. • The differential gear bearing may be lightly tapped into
place. The output seal can be installed once the
assembly is in place.

TORQUE
Output Gear Retaining Screws:
8-12 ft-lbs (11-16 Nm)

7. Install the oil deflector shield into the gearcase.
Apply Loctite 242® to the threads of the screws.
Torque the screws to specification.

TORQUE
Oil Deflector Screws:
25 in-lbs (3 Nm)

6.26 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.