Page 473 - Manual Oficina Polaris Sportsman 570 2014 a 2016

TRANSMISSION

9. Tensioner Installation: 4. Lift the end of the spring up and over the rear pin.
The tensioner cam will lift the shoe to provide
NOTE chain tension.
Case-halve mating may be difficult due to tensioner
pressure on the silent chain during installation. Release
tension at the ratcheting cam to aid case half
installation. Release the tensioner spring after the case
halves are mated but not yet touching.

1. Assemble the tensioner cam and tensioner shoe
and place them into the transmission.
2. Insert the front pin through the tensioner cam and
the rear pin through the tensioner shoe.

10. Apply a continuous bead of Crankcase 3 Bond
Sealant to the LH gearcase mating surface and
install the cover. Install and tighten the 20 screws in
an even criss-cross pattern to evenly secure the
cover. Torque the screws to specification.
6
Crankcase 3 Bond Sealant: 2871557

TORQUE
Transmission Case Bolts:
30 ft-lbs (41 Nm)

3. Place the spring over the front pin and hook the
spring leg under the cam.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 6.27
© Copyright Polaris Industries Inc.