Page 497 - Manual Oficina Polaris Sportsman 570 2014 a 2016
P. 497
FINAL DRIVE
7. Remove the torsion spring retainer y. 10.Remove the LH output hub s.
7
8. Remove the torsion spring u from the top of the ring 11. Inspect the bearing and contact surfaces of the output
gear i. hub for signs of wear or damage. Replace component
if found to be worn or damaged.
9. Remove the roll cage assembly o, rollers a, and
ring gear i. Inspect for wear. 12.Thoroughly clean all parts. Inspect the bearing
surfaces of the output hub. Inspect the rollers a for
nicks, scratches and flat spots. Inspect the roll cage
o for damage or cracks. The rollers must slide up
and down freely within the roller cage surfaces.
9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 7.21
© Copyright Polaris Industries Inc.
