Page 498 - Manual Oficina Polaris Sportsman 570 2014 a 2016
P. 498
FINAL DRIVE
13.Inspect the ring gear i for inconsistent wear patterns
or damage. The surfaces should be free of nicks or 16.Drill a hole in the input shaft seal d and remove the
burrs. seal using a pry bar or seal puller.
14.Inspect roll cage (B) sliding surface. This surface
must be clean and free of nicks, burrs or scratches.
Inspect the H-springs, but do not remove them
from the roll cage.
17.Remove the snap ring retaining the input shaft
assembly.
15.Inspect the armature plate for a consistent wear
pattern. Uneven wear of the armature plate indicates
a warped plate, which may cause intermittent
operation.
NOTE
See “FRONT GEARCASE DIAGNOSIS” later in this
chapter for more details.
18.Remove the input shaft assembly. Inspect the pinion
gear g for chipped, broken, or missing teeth. Inspect
the input shaft bearing h for signs of wear. Replace
the input shaft cover O-ring prior to reassembly.
7.22 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.
