Page 500 - Manual Oficina Polaris Sportsman 570 2014 a 2016
P. 500
FINAL DRIVE
7. Install the torsion spring by wrapping each leg of the 11. Check the action of the torsion spring by rotating in
spring around the dowel pin on the ring gear. both directions to ensure the spring and retainer are
installed properly.
8. Install the rollers and roll cage into the ring gear.
Insert the rollers as the roll cage is installed. 12.Install the armature plates t. Be sure the armature
plate tabs are fully engaged into the roll cage
assembly.
9. Install the pins a, roll cage o, and ring gear
assembly i into the gearcase housing.
NOTE
Verify armature plate tabs are in the slots on the roll
cage and are resting in the ring gear grooves.
13.Install the RH output hub e into the gearcase
housing. The output hub should spin freely.
10.Align the spring retainer dowel pin with the ring gear
dowel pin and install the retainer y on top of the
torsion spring.
7.24 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.
