Page 556 - Manual Oficina Polaris Sportsman 570 2014 a 2016

STEERING / SUSPENSION

2. Install Spacer q over the top of the ball joint face. BALL JOINT INSTALLATION
1. By hand, install the NEW ball joint into the A-arm.
2. Position the Installation Adapter w over the face of
the ball joint.

3. Place Removal Adaptor w over the ball joint shaft.
4. Install the Press Asm. e onto the A-arm to engage
the ball joint Removal Adapter.

NOTE 3. Position the Spacer q over the shaft of the ball joint
Be sure the Press Asm. opening is only contacting the so it is against the A-arm.
Spacer q and not the ball joint face. 4. Install the Press Asm. e onto the A-arm to engage
the Installation Adapter and Spacer.
5. Tighten the Press Asm. screw and fully remove the 5. Tighten the Press Asm. screw and fully install the ball
ball joint from the A-arm. joint into the arm.

6. After the new ball joint is fully installed into the A-arm,
install a new retaining ring.

8.34 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.