Page 670 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ELECTRICAL

RIDER INFORMATION DISPLAY
The rider information display is located in the instrument cluster. All segments will light up for 1 second at start-up.
NOTE
If the instrument cluster fails to illuminate, a battery over-voltage may have occurred and the instrument cluster may
have shut off to protect the electronic speedometer.

The reverse override button on the LH control acts as the MODE button when pressed and released quickly. The
transmission cannot be in reverse when using the override button as a MODE button.

INDICATOR DESCRIPTION
q Vehicle Speed Display Analog display of vehicle speed in MPH or km/h.
w Information Display Area LCD display of the service hour interval, total vehicle miles or km., total engine
hours, trip meters and engine RPM.
e MPH / KM/H Display MPH is displayed when the instrument cluster is in the Standard mode. KM/H is
displayed when the instrument cluster is in the Metric mode.
r High Beam Indicator Icon illuminates when the LH control headlamp switch is in the high beam position.
t Fuel Level Indicator LCD bar graph indicating current fuel level. All segments will flash when the last
segment is cleared indicating a low fuel warning.

y Clock Displays current time in either 12-hour or 24-hour formats.
u Engine Temperature LED icon illuminates when the ECM determines the engine is overheating. The
Indicator indicators will initially flash to indicate the engine is overheating. The indicators will
stay lit and not flash if a severe overheating condition exists.
i Service Interval Indicator Preset at the factory and adjustable by the user, a flashing wrench symbol alerts the
operator that the preset service interval has been reached and maintenance should
be performed. The wrench icon will flash for 10 seconds upon start-up once it
reaches 0.
o Check Engine MIL Illuminated when the ECM has detected a Diagnostic Trouble Code in the engine
management system.
a AWD Indicator Illuminated when the RH control switch is in either 4x4 or ADC 4x4 position.
s TURF Indicator Illuminated when the RH control switch is in the TURF position (X2 Models Only).
d Neutral Gear Indicator LED icon illuminates when gear selector is in the neutral (N) position.
f Gear Position Indicator H = High
L = Low
N = Neutral
R = Reverse
P = Park
– = Gear Signal Error (shifter stuck between gears)
g Power Steering System LED icon illuminates when a fault has occurred with the power steering system.
MIL This indicator illuminates when the key is turned to the ON position and goes off
when the engine is started.
h Turn Signal / Hazard Lamp LED icon illuminates whenever the LH, RH or hazard lamps are activated
Indicator (International Models Only).
j Active Descent Control Illuminated when the RH control switch is in the ADC 4x4 position and ADC is
Indicator active.

11.8 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.