Page 671 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ELECTRICAL

INFORMATION DISPLAY AREA Engine Hours
The LCD portion of the instrument cluster is the
information display area. Information displayed in this
area includes: odometer, trip meters, engine RPM,
engine hours, service interval, clock, engine Diagnostic
Trouble Codes (DTCs) and power steering DTCs.
The reverse override button on the LH control acts as the
MODE button when pressed and released quickly. The
transmission cannot be in reverse when using the
override button as a MODE button.
Odometer
Engine hours are logged anytime the engine is running.
Total hours can not be reset.
Programmed Service Interval

The odometer records and displays the total distance
traveled by the ATV. The odometer can not be reset.
Trip Meters (Trip1 / Trip 2)
The initial factory service interval setting is 50 hours.
Each time the engine is started, the engine hours are
subtracted from the service interval hours. When the
service interval reaches 0, the LCD wrench icon will flash
for approximately 10 seconds each time the key is turned
ON.
To change the hour setting or reset the function, follow
these steps:
1. Toggle the MODE button until the wrench icon is
displayed in the information area.
The trip meters records the miles traveled by the ATV on 2. Press and hold the MODE button until the information
each trip. To reset the trip meters: display area begins to flash.
1. Toggle the MODE button to Trip 1. 3. Toggle the MODE button to increase the service
2. To reset to 0, push and hold the MODE button until interval hours in 5 hour increments to a maximum of
the distance display changes to 0. 100 hours.
3. Perform this same procedure to reset Trip 2. 4. To turn off the service interval function, toggle the
MODE button until “OFF” is displayed.
Tachometer (RPM)

11

Engine RPM can be displayed digitally.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 11.9
© Copyright Polaris Industries Inc.