Page 146 - Manual Oficina Polaris RS1 2018 e 2019
P. 146
ENGINE / COOLING SYSTEM
STARTER ONE-WAY CLUTCH 4. Inspect drive surface of starter gear e and bushing
DISASSEMBLY r for wear, damage or uneven surface. If any starter
1. Lift up to remove starter one-way gear. one-way clutch component is worn or damaged,
replace the clutch and starter gear as an assembly.
2. Remove the three one-way clutch retaining screws.
CRANKCASE DISASSEMBLY / INSPECTION
1. Remove the four screws retaining the oil cooler q to
the crankcase.
3. Remove the one-way clutch and inspect both sides
of drive rollers q. Inspect the roller contact surface
w inside the hub for wear, damage or uneven
surface.
2. Remove the crankcase drain plug w. Drain any oil
remaining in the engine. Reinstall the plug.
3. Remove the oil filter.
3.60 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.
