Page 148 - Manual Oficina Polaris RS1 2018 e 2019

ENGINE / COOLING SYSTEM

11. Lift the oil pump drive chain and remove the oil 14. Remove the eleven M6 g and two M8 h upper
pump. crankcase bolts.

15. Rotate the engine so the cylinder is facing down.
12. Visually inspect the oil pump and drive sprocket d
for wear or damage. Replace oil pump drive chain 16. Remove the eight M10 k, two M8 l and one M6 j
and sprocket if worn or damaged. If any part of the oil lower crankcase bolts. Discard the eight M10 bolts.
pump is damaged, the entire assembly must be
replaced. Replace the oil pump seal f during
crankcase assembly.

17. Tap on the lower crankcase in reinforced areas with
a soft faced hammer to loosen. Carefully lift up and
remove the lower crankcase half.

NOTE
Oil pump assembly is non-serviceable

13. Rotate the engine so the cylinder is facing up.

3.62 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.