Page 147 - Manual Oficina Polaris RS1 2018 e 2019

ENGINE / COOLING SYSTEM

4. Install the Cylinder Holding & Camshaft Timing Plate 9. Remove the three bolts o that retain the oil pump a
(PU-50563) e onto the cylinder. The cylinder holding to the crankcase.
tool retains the cylinder and pistons when the engine
is rotated.

3

10. Use one of the oil pump retaining bolts or a pen
magnet to extract the dowel pins s from the oil
5. Rotate engine to access the crankcase sump cover. pump. Doing so allows for oil pump removal without
having to remove the pump drive sprocket.
6. Remove the thirteen M6 t and three M8 bolts y
retaining the sump cover r to the crankcase.

7. Remove the sump cover u from the crankcase. NOTE
If unable to extract the dowel pins from the oil pump,
the oil pump sprocket must be removed. Access the
sprocket bolt by removing the case plug.

8. Remove and clean oil pump pick-up i.

9928689 - 2018 RZR RS1 Service Manual 3.61
© Copyright Polaris Industries Inc.