Page 226 - Manual Oficina Polaris RS1 2018 e 2019
P. 226
FUEL SYSTEM
CPS REPLACEMENT 3. Unclip the wire harness retainer e and remove the
CPS harness from the retainer to allow replacement.
1. If not done already; disconnect the CPS harness 4. Install new sensor using a light coating of oil on the
connector (see “CPS Test”). O-ring to aid installation.
2. Using an 8mm socket, remove the CPS retaining bolt
5. Torque the CPS retaining bolt to specification.
q and remove the sensor w from the stator cover.
TORQUE
CPS Retaining Bolt:
9 ft-lb (12 Nm)
4.40 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.
