Page 223 - Manual Oficina Polaris RS1 2018 e 2019
P. 223
FUEL SYSTEM
18.Torque PFA nut to specification using the Fuel Pump
Service Tool (PU-50326) and a calibrated torque
wrench.
TORQUE
Fuel Pump PFA Nut:
70 ft-lbs (95 Nm)
19.Verify alignment of fuel pump and tank orientation
marks.
20.Connect the fuel supply line to the pump (see “Fuel
Lines” in the Maintenance chapter for specific
installation procedures).
NOTE
Be sure to engage the retainers on each fuel line until 4
each snaps into place. Pull on fuel lines lightly to
confirm connection.
21.Install the fuel tank vent line onto the tank fitting.
22.Connect the fuel pump electrical harness.
23.Test the fuel pump by turning on the key and listening
for the pump to activate. Cycle the key several times
to prime the system.
24.Install the seat.
9928689 - 2018 RZR RS1 Service Manual 4.37
© Copyright Polaris Industries Inc.
