Page 300 - Manual Oficina Polaris RS1 2018 e 2019

TRANSMISSION

GEAR CLUSTER DISASSEMBLY 1. Using the Snorkel Tube Tool and two of the coupler
1. Remove the bearing from the reverse shaft using a bolts to hold the coupler, remove the front output
bearing puller. Remove the retaining ring and slide shaft coupler nut q and washers w.
the washers, high gear and needle bearing off the
reverse shaft.

Snorkel Tube Tool:
PU-51862
q Park/Low Shift Dog y Needle Bearing
2. Use the snorkel tube tool to remove the snorkel tube
w Thrust Washer u Reverse/High Shift and front output shaft as an assembly.
Dog

e Low Gear i Snap Ring

r Reverse Shaft o High Gear
t Reverse Gear a Bearing

2. Remove the Reverse/High shift dog.
3. Remove the snap ring, washer, needle bearing, and
reverse gear from the reverse shaft.
4. If necessary, disassemble the other end of the
reverse shaft. Remove the bearing , Park/Low shift
dog, retaining ring, washer, low gear and needle
bearing from the reverse shaft.
SNORKEL TUBE REMOVAL / DISASSEMBLY
CAUTION
The pinion shaft must be removed prior to removing the
snorkel tube assembly. Failure to remove pinion shaft
will result in damage to the snorkel tube or LH
gearcase.

6.24 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.