Page 383 - Manual Oficina Polaris RS1 2018 e 2019

STEERING / SUSPENSION

SPRING ADJUSTMENT (WALKER EVANS) Shock Spanner / Clutch Spreader Tool:
The front and rear shocks have a ride height adjustment. 2878925
Suspension springs may be adjusted to suit different
riding conditions or vehicle payloads.
NOTE
Polaris does not recommend increasing the spring
WARNING
adjustment by more than one inch (25.4 mm) over the
Uneven adjustment may cause poor handling of the factory setting as it may negatively impact vehicle
vehicle, which could result in serious injury or death. stability. Always return the spring preload to the factory
Always adjust both the left and right spring equally. setting after the load is removed from the vehicle.

The factory setting is appropriate for nearly all riding
conditions. If desired, the spring setting may be adjusted
to maintain vehicle clearance height when carrying
loads.
1. Raise and safely support front or rear of the vehicle
off the ground to allow the suspension to fully extend.
2. Using the shock spanner/spreader tool included in
the vehicle’s tool kit, turn the adjustment collar q to
increase w or decrease e ride height.

8

Front Shock Rear Shock

9928689 - 2018 RZR RS1 Service Manual 8.35
© Copyright Polaris Industries Inc.