Page 384 - Manual Oficina Polaris RS1 2018 e 2019

STEERING / SUSPENSION

Spring Adjustment - Factory Setting (approx.)

MODEL FRONT REAR
RZR RS1 3.00″ (76 mm) 9.30″ (236 mm)

WALKER EVANS™ SHOCK REBUILD VALVE SHIM ARRANGEMENT
INFORMATION Shown below is an example of how valving stacks are
When performing maintenance on Walker Evans™ arranged.
shocks, use the Gas Shock Recharging Kit (PN
2200421), as it contains the necessary valves, pressure NOTE
gauge, and fittings to deflate and pressurize shocks.
The rebound and compression valve stacks will always
be positioned as shown in the illustration, regardless of
WARNING how the shock assembly is installed.
Walker Evans™ shocks contain high pressure nitrogen
gas. Extreme caution must be used while handling and
working with Walker Evans™ shocks and related high
pressure service equipment. The pressure must be
released from the shock before disassembly. It is
strongly recommended you wear safety glasses and
ear protection during these procedures.

SPECIAL TOOLS
SHOCK PISTON ORIENTATION
PART
NUMBER DESCRIPTION The face of the piston with the greater number of relief
ports will always face the rebound valve stack.
2200421 Gas Shock Recharging Kit

PS-45908 IFP Tool
PU-50979 Shock Body Holding Tool - Front

PU-50938 Shock Body Holding Tool - Rear
2872429 Shock Rod Holding Tool - Front
PS-50931 Shock Rod Holding Tool - Rear

PU-50939 Shock Seal Protector Sleeve - Front
PU-50952 Shock Seal Protector Sleeve - Rear

8.36 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.