Page 462 - Manual Oficina Polaris RS1 2018 e 2019

ELECTRICAL

q Vehicle Speed Display - Analog display of vehicle d Gear Position Indicator - Displays gear selector
speed in MPH or km/h. position.
H = High
L = Low
N = Neutral
R = Reverse
P = Park
– = Gear Signal Error (shifter stuck between gears)

w Information Display Area - Odometer / Trip Meter / f Power Steering System MIL - Illuminates when a
Tachometer / Engine Temperature / Engine Hours / fault has occurred with the power steering system. This
Service Info / Clock - LCD display of the service hour indicator illuminates when the key is turned to the ON
interval, total vehicle miles or km., total engine hours, a position and goes off when the engine is started.
trip meter, engine RPM and engine temperature.
e MPH / KM/H Display - MPH is displayed when the g Turn Signal / Hazard Lamp Indicator - Illuminates
instrument cluster is in the Standard mode. KM/H is whenever the LH, RH or hazard lamps are activated
displayed when the instrument cluster is in the Metric (INT’L Models Only).
mode.

r High Beam Indicator - LED icon illuminates h Helmet / Seat Belt Indicator - Illuminates for several
whenever the headlight switch is in the high beam seconds when the key is turned to the ON position. The
position. lamp is a reminder to the operator to ensure all riders are
wearing helmets and seat belts before operating the
vehicle.
t Fuel Level Indicator - LCD bar graph indicating j ADC Indicator - Illuminates when Active Descent
current fuel level. Control (ADC) is selected.
y Clock - Displays current time in either 12-hour or 24- k Performance Limited Indicator - Illuminates when
hour formats. engine performance is electronically limited.
u Engine Temperature Indicator - Illuminates when l Low Fuel Indicator - Illuminates when fuel level
the ECU determines the engine is overheating. The reaches lowest bar on fuel level indicator.
indicators will initially flash to indicate the engine is
overheating. The indicators will stay lit and not flash if a
severe overheating condition exists.
i Service Interval Indicator - Preset at the factory and 1( Engine Speed Display - Analog display of engine
adjustable by the user, a flashing wrench symbol alerts speed in thousands of revolutions per minute.
the operator that the preset service interval has been
reached and maintenance should be performed. The
wrench icon will flash for 10 seconds upon start-up once
it reaches 0.

o Check Engine MIL - Illuminates when the ECU has 2) Parking Brake Indicator - Illuminates when parking
detected a Diagnostic Trouble Code in the engine brake is engaged (INT’L Models Only).
management system.

a AWD Indicator - Illuminates when the AWD / TURF 2! Low Battery Indicator - Illuminates when battery
switch is in the AWD position. voltage drops below 8.5 Volts.

s Neutral Gear Indicator - Illuminates when gear
selector is in the neutral (N) position.

11.14 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.