Page 467 - Manual Oficina Polaris RS1 2018 e 2019
P. 467

ELECTRICAL

                   SWITCHES

                   CONTROLS







































                    q Key Switch                                        e Head Light Switch
                    w AWD Switch                                        r Accessory Light Switch


                   BRAKE LIGHT SWITCH                                    3. Apply the brake and check for continuity. If there is
                                                                             no continuity or if resistance is greater than 0.5
                   1. The brake light switch q is located on the front brake
                       line banjo bolt of the master cylinder. The brake     ohms, clean the switch terminals. Re-test and
                       switch can be accessed through the left front wheel   replace switch if necessary.
                       well opening.                                     4. For switch replacement, refer to Chapter 9 “Brakes”.









                                                                                                                            11










                   2. Disconnect wire harness from switch and connect an
                       ohmmeter across switch contacts. The reading
                       should be infinite (OL).


                   9928689 - 2018 RZR RS1 Service Manual                                                             11.19
                   © Copyright Polaris Industries Inc.
   462   463   464   465   466   467   468   469   470   471   472