Page 53 - Manual Oficina Polaris RS1 2018 e 2019
P. 53

MAINTENANCE


                   18.Add the recommended oil as necessary to bring the  ENGINE CYLINDER LEAKDOWN TEST
                      oil level within the SAFE range on dipstick. Do not  A cylinder leak-down test is the best indication of engine
                      overfill.                                          condition. Follow tester manufacturer’s instructions to
                                                                         perform a cylinder leak-down test. Never use high
                                                                         pressure leakage testers as crankshaft seals may
                                                                         dislodge and leak.
                                                                                                                              2
                                                                                  Cylinder Leakage Service Limit: 15%
                                                                          If leakage exceeds service limit, inspect the engine for
                                                                                             the cause.

                                                                                               NOTE
                                                                          A brand new or rebuilt engine will have higher leakdown
                                                                            than an engine with 5 hours of runtime. Leakdown
                   19.When finished, reinstall the oil fill cap, oil dipstick and  should decrease once the rings are broken in.
                      lock the lever.
                   20.Reinstall the rear right-hand fender, airbox access
                      panel, and seat.
                   21.Dispose of used oil and filter properly.

                   ENGINE CRANKCASE BREATHER HOSE
                   INSPECTION
                   The engine crankcase is equipped with a breather hose.
                   Inspect the breather hose for possible kinks or wear. The
                   hose is form fitted for proper fit.
                   Follow the breather hose q from the crankcase fitting w
                   to the airbox hose e.






















                                         NOTE
                         Make sure hoses are not kinked or pinched.


















                   9928689 - 2018 RZR RS1 Service Manual                                                              2.31
                   © Copyright Polaris Industries Inc.
   48   49   50   51   52   53   54   55   56   57   58